H y d r a u l i c
R o t a r y H a m m e r D r i l l
2 2 4 2 6 0 0 1 0
Translation of the original manual,
compiled: 24.02.17
224260010_BA_en_Version_CSU_00
Page 8 of 18
Basic Safety Instructions
Read operation instructions/safety instructions!
Before working on or with the tool, read the safety instructions and follow the instructions
during operation.
Do not modify the machine or the machine tools and accessories after receipt. Any constructive changes or
modifications need the manufacturer`s acceptance and have to be in compliance with the safety
instructions. Use the machine only for its determination. Consider the technical data of the equipment and
the ambient temperatures. Pay attention to labels, restrictions of use and special instruction notes on the
machine tools and the machine itself. Check regularly that the type plate and symbols on the machine are
legible. If necessary, contact the manufacturer to replace them. Only operators with technical knowledge,
trained by authorized responsible technical personnel, may install, adjust, operate, transport and store the
machine.
Employer’s Obligations
Generally, the employer is responsible for the faultless condition/operation of the machine and the
adherence to the safety regulations. The machine is designed and manufactured according to the technical
safety regulations. However, using it, there is still a risk of accidents to the operator or third parties or
damage to the machine or other objects. All current regulations and specifications, which apply to the site of
operation in regards to accident prevention, installation of electrical and mechanical systems as well as radio
interference must be considered
.
IMPORTANT - The employer must make sure that…
risk assessment is carried out for the specific risks, which can occur due to any operation of the
machine,
the function of the safety equipment is regularly checked,
the safety symbols and safety notes on the machine/ device and in the operating instruction booklet are
considered,
the safety instructions and the operating instruction booklet are available completely and in legible
condition on site with the machine.
The employer is obliged to allow personnel to work on the machine only, who:
Are familiar with the basic work environment safety rules and accident preventing regulations. Also,
those persons must have been instructed in the correct use of the machine,
have read and understood the safety and warning notes in the operating instruction booklet as well as all
the other documentation pertaining to the machine,
have been tested at regular intervals in regards to their safety-conscious operation.
Safety-conscious working
Additionally to the safety instructions in this manual and the intended use, the following safety regulations
have to be considered:
Accident prevention instructions, safety and operation regulations,
explosion protection directives,
safety regulations for the operation with hazardous material,
effective norms and laws.
Operator’s Obligations
All persons who are assigned to work with the machine are obligated to:
Pay always attention to the basic safety and accident preventing regulations,
read always and follow the safety and warning notes in the operating instruction booklet.
