INITIAL PREPARATION
Turn on the scale and prompt to next parameter. (Please refer to the Setting Personal
Parameter overleaf).
Advance the value by one interval each press. Continuous pressing will speed up the
advance of value. For choosing the code, gender, age and height.
Decrease the value by one interval each press. Continuous pressing will speed up the
Decrease of value. For choosing the code, gender, age and height.
1. Install 2x3 V batteries onto the compartment underneath the main scales unit.
2. Place the unit on a dry, flat and solid ground surface, ensure the unit is standing
stable. Avoid carpet, or wavy ground surface.
ENGLISH
4
Age
User memory
code
Height Unit
Gender
Muscle %
Fat %
Fat status indication
Hydratation %
Percentage
FAT MONITOR SCALES OPERATION
Initial Set Up
1. Wake up the unit. LCD segments light up briefly. By pressing button ‘SET’ key will take you
through cycle of setting all parameters.
a. Press Up / Down Arrow (
▼▲
) button to advance / reverse to the memory station which you
would like to choose or had been designated to you. Press ‘SET’ button to confirm setting, LCD
will prompt to next parameter setting (Gender) at the same time.
b. Press Up / Down Arrow (
▼▲
) button to advance / reverse to choose the gender of your type.
Press ‘SET’ button to confirm setting. LCD will prompt to next parameter setting (Height) at the
same time.
c. Press Up / Down Arrow (
▼▲
) button to advance / reverse to adjust to your height level. Press
‘SET’ button to confirm setting, LCD will prompt to next parameter (Age) at the same time.
d. Press Up / Down Arrow (
▼▲
) button to advance / reverse to adjust to your age. Press ‘SET’ but-
ton to confirm setting. LCD will prompt to Memory setting. All setting complete!
At this point, you can continue to press ‘SET’ button a few consecutive times to re-cycle
through the setting mode to review and assure all the parameters are correctly set.
2. Step on the scales gently (ensure to remove your socks and shoes, wipe clean your feet and the
weighing platform to get the best conductive effect). While stepping on, align your feet to the
metal conductive pads, two for each foot. Ensure your feet are standing apart not touching each
other (to avoid short circuit).
As soon as you step on the scales, LCD will immediately display incrementing digits till it stabi-
lizes, locked and flashes, indicating your current weight.
3. Within a few seconds, the scales will automatically compute your Fat % and Hydration %,
Muscule %. LCD will prompt to show your Fat % followed by Hydration %. Subsequently, LCD will
prompt back and forth alternately between value of Fat % and Hydration % for 5 times, and then
automatically shut down.
You will see a key line segment of multiple vertical bars. This key line serves to give an
indication of your Fat % level, telling where your fat level standing is comparing to the
UBS-2100E Inst 12/9/08 5:24 PM Page 4
