15
Default Sound Signals:
Several conditions are also signaled by a pattern of tones in addition to the LED display:
Tone
Meaning
One short beep
LED is flashing green
The unit was successful in reading the MICR line.
Three short beeps
LED is flashing red
The unit was not successful in reading the MICR line.
One long beep
LED is flashing red
An error occurred during processing or storing of the captured image.
A Typical Check Processing / LED Cycle:
1. The unit is on and idle…the LED is Solid Amber.
2. The LED turns to Solid Green when the scanner is ready to accept a check.
3. A check is run through the unit…the LED turns OFF (3-4 seconds) then Flashes Green. The
unit emits a short “beep” sound.
4. The LED returns to Solid Amber when the transaction is complete.
