![background image](http://html1.mh-extra.com/html/unistrong/ut30/ut30_quick-start-manual_3951225014.webp)
battery is fully charged.
7. Do not put the battery in a fire. Please discard the battery in a proper manner or take the
battery to a battery recycling station. Please dispose waste batteries in accordance with local laws
and regulations.
NOTICE:
The SAR limit of Europe is 2.0 W/kg. Device types UT30 has also been tested against this SAR limit.
The highest SAR value reported under this standard during product certification for use on the
body is 0.977W/kg This device was tested for typical body - worn operations with the back of
the handset kept 0 cm from the body. To maintain compliance with RF exposure requirements,
use accessories that maintain a 0 cm separation distance between the user's body and the back
of the handset. The use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with RF exposure requirements, and should be avoided.
Working Temperature: -20
℃
~ +55
℃
Storage Temperature: -40
℃
~ +70
℃
Charging mode need to operate indoors, please pay attention to the environment temperature
should be 0
℃
~ +45
℃
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
Hereby, [Shenzhen UniStrong Science & Technology Co.,Ltd.] declares that the radio equipment
type [UT30] is in compliance with Directive 2014 / 53 /EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://en.unistrong.com/declaration.html
This device complies with Part 22 & 24 and Part 27 of the FCC Rules.
SAR INFORMATION
The SAR limit of FCC and ISED is 1.6 W/kg averaged over one gram of tissue. Device types UT30
( FCC ID:2AOPD-UT30 and IC: 11546A-UT30 ) has also been tested against this SAR limit. The
highest SAR value reported under this standard during product certification for use on the body is
1.047 W/kg. This device was tested for typical body -worn operations with the back of the
handset kept 0 cm from the body. To maintain compliance with FCC and ISED RF exposure
requirements, use accessories that maintain a 0 cm separation distance between the user's body
and the back of the handset. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC and ISED RF exposure requirements, and should be
avoided.
Summary of Contents for UT30
Page 1: ...UT30 Quickstart guide...