UNIS Ultra Moto VR, Operation Manual

Page: 17 / 99

Ultra Moto VR Manual
03/03/2020
16
Screw hole
Middle plastic
Step 6-3 Open front door on the Main cabinet right side. Route the headset cable into the
Main cabinet through the hole.
Locate the back box. Connect cables to the PC as shown below.
Note: It is the same installation method on the other Moto assembly
.
Step 7 Install Middle plastic and Router.
Kit list:
No. Name/Spec. Picture Qty
1
Cross recessed hexagon screw set
M4×12 black
2
2
Cross recessed hexagon screw set
M4×10 black
2
Step 7-1 Utilize Phillips screwdriver to fix 2 screws to secure Middle plastic to Middle
cabinets.
Step 7-2 Place Router and pressing plate on the back of the Middle plastic. Utilize Phillips
screwdriver to fix 2 screws to secure pressing plate. Insert the power cord to the socket.
Router