UNIS Ultra Moto VR, Operation Manual

Page: 52 / 99

Ultra Moto VR Manual
03/03/2020
51
8.15.1 Motion Platform Calibration Instruction
Note: Utilize left and right brakes to choose and press the Start button to enter and set.
Step 1 Go to [Main Menu] → [System Settings] → [Air Spring Adjustment].
Step 2 Select [Adjustment] to begin the adjustment.
Note: If press down on the [STOP] button, the following warning will appear: [Motion Off]. press the STOP
button to cancel the calibration, and restart the machine.
Step 3
If the Motion platform still fail, please turn off the Electric Jack Settings (
[Main Menu]
→ [System Settings] → [Electric
Jack setting
s]
) and try Air spring Adjustment again.
If the Motion platform returns to normal after closing the Electric Jack, please contact the
UNIS service for maintenance.
Step 4
If the Motion platform still fail, Please open the middle cabinet back door. Check
whether the air pressure of the Air compressor is 0.25MPa.