OPERATING MANUAL FOR
KENTUCKY HOT
6
4
SAFETY IN USE
For personal safety when operating equipment is mainly responsible the operator. Manufacturer of the showcase is not
responsible for personal injury or property damage and environmental damage caused while the unit is not used and
serviced in accordance with the instructions for operation and maintenance and the applicable safety regulations.
4.1
In general
! Showcase may be used by the
trained personnel only
. Never allow anyone, who is not authorized to use the display
case and is not familiar with its functions, to manipulate it, carried its maintenance or other activities contrary to its
intended use. Such improper operation may result in injury or damage the device.
! Showcase may be used only for their intended purpose and in accordance with the instructions. Any other use is in
contrary with its purpose and it is considered as dangerous.
! For safety reasons, do not remove the cover or attempt to get into the case. There are no parts which you, as the
user, can manipulate. Repair of any faults and maintenance, beyond that described in this manual, must be carried out
by qualified service technicians.
! Do not block the ventilation holes of the equipment.
! Before use, check the exhibition space. Remove the remnants of food, unremoved cleaners, protective foil or other
objects and clean the exhibition space thoroughly.
! Do not place the device on or near ignitable sources.
! Check the correct positioning and securing of shelves. Incorrect placement of shelves may lead to fall and cause injury.
4.2
While using the showcase
! If the device is damaged in any way, turn it off immediately, unplug it from the power supply and contact your supplier.
! Operate the control panel buttons by using fingers exclusively. Using sharp, pointed or other objects to control the
device will affect the warranty of equipment.
! Ensure that the load of shelves and exhibition space does not exceed the maximum permissible load (Chapter 5.4).
! When opening showcase do not press on the glass surface and do not use excessive force. Glass can break and cause
injury.
Always be aware of touching heated internal parts of the showcase without proper tools, ie hands protection.
4.3
After working with a showcase
! For cleaning, use only non-aggressive cleaning agents.
! For cleaning, do not use sharp objects.
! Never use water stream, there is a risk of electrical short circuits. Clean only with the damp cloth.
! During periods of disuse device, turn off the power supply.
4.4
Electrical safety
! If there is any damage to the electrical parts of the equipment, it is necessary to ensure the immediate repair. The
damaged equipment must not be operated.
! Do not damage, alter or bend the power cord excessively. Do not tighten it and avoid its twisting. Placing heavy objects
on the power cord and other compression may result in electric shock or fire.
! Use a single dedicated AC socket only. Do not use extension cords or multiple sockets, can cause overheating and
electric shock or fire.
! The device is intended for indoor use only. It must not be exposed to rain, there is a risk of electric shock.
! If the installation of showcase in a moist environment is unavoidable, install a circuit breaker with effective protection
against current leakage. If the circuit breaker is not installed, there is a risk of electric shock.
