OPERATING MANUAL FOR
KENTUCKY HOT
10
6.3
Regular maintenance
Dirt can impede the exchange of heat between the unit and the environment, which causes an increase in electricity
consumption and shortens the life of the equipment. Thus,
each month clean the space under and around unit
.
Regularly check the
power cable
:
• Pull out the cord from the power supply socket.
• The cable must be in perfect condition, unbroken and untwisted. If there is any damage it must be repaired or
replaced by a qualified person immediately.
6.4
Troubleshooting
PROBLEM
CHECK
The unit does not heat
Is not the current supply interrupted?
Is not the power cord damaged?
Is not the plug of power cord pulled out of the power supply socket?
Are not the fuses or circuit breaker blown?
Showcase heat a little
Is the correct temperature set?
Are not the circulation of heated air or intake grids blocked by goods?
Are not the goods too close together?
Are not the doors opened or their opening frequency too high?
Are not the fan grids or front vents clogged with dust or other impurities?
Showcase produces
excessive noise
Are all adjustable feets in contact with the floor?
Are not other devices contiguous or follow too closely of the unit's furniture? Does not
the unit vibrate too much?
Is not the showcase in contact with other unwanted objects?
On the outer surface of
the case is
condensation (water)
Condensation on the outer surface of the display case can occur during cold, humid day, or
depending on the site of installation. It occurs when there is high humidity of ambient air
and water from the cold air is coming into contact with hot surfaces. This is normal. In this
case, wipe the showcase with a dry cloth.
The inner surface is
covered by enormous
condensation
Before putting in it is recommended to keep the food which have been taken out from combi
oven or pot outside for some time. Any hot food produce steam and it may condensate on
inner glass.
Showcase works, but
light does not light
Are the the lights on? (control panel, button 2)
Is the LED strip or its cable damaged? If so, contact service.
If you meet the above conditions and showcase still does not work, unplug showcase from the power supply and call your
supplier.
Power failure:
Showcase turns on automatically after a power failure.
The showcase can be repaired by the authorized service only.
In case of improper or unauthorized service warranty
does not apply!
