INSTALLATION GUIDE
PAGE
21
FINISHING TOUCHES
OPTIONAL END CAP:
To install the end cap, place the cap
on the edge of the rail and press the
cap onto the rail.
INSTALL UL2703 CERTIFICATION MARKING LABEL:
After the racking system is fully assembled, a single label should be
applied to the rail at the edge of the array. One certification label is
supplied in every box of 20 clamps.
Note:
• The sticker label should be placed such that it is visible.
• Cutoff all corners except NXT before applying on rail.
OPTIONAL COMBO CLAMP CAP:
To install the combo clamp cap, place
the cap on the edge of the rail and press
the cap onto the clamp.
IMAGE-1-RAIL END CAP
IMAGE-2X-COMBO CLAMP CAP
IMAGE-2-END CAP AND COMBO CAP
IMAGE-3-STICKER VIEW
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A
A
B
B
C
C
D
D
Place module, flush with rail ends. The bolt head
Place module, flush with rail ends. The bolt head
of the clamp must not protrude beyond the rail
of the clamp must not protrude beyond the rail
edge. Modules must be fully supported by rails
edge. Modules must be fully supported by rails
and cannot overhang at the ends of rails.
and cannot overhang at the ends of rails.
FOR COMBO CLAMP
FOR HIDDEN CLAMP
Module
Module
END CAP INSTALLATION:
To install the end cap, tuck in the twist tie in the rail beside the bolt. Position the
cap on the edge of the rail and press the cap onto the rail.
CAUTION
Ensure the clamp bolt
head does not protrude
outside of the rail while
cutting the rails for end
cap installation.
Pro Tip:
Pro Tip:
For best appearance, leave
For best appearance, leave
enough space for the bolt
enough space for the bolt
head while cutting the rail
head while cutting the rail
ends to perfectly snap fit
ends to perfectly snap fit
the end cap.
the end cap.
