U G P - 3 0 E – C T 2
14
piped connection. Never reuse an old connector when installing a new rangetop. If
the hard piping method is used, you must carefully align the pipe.
To prevent gas leaks, use pipe joint compound resistant to NG gases on all male
external pipe threads.
1.
In an easily accessible location, install a service manual gas shut off valve. Be
sure everyone operating the rangetop knows where and how to shut off the
gas supply to the cook top.
2.
Use a flexible gas line to connect to the 1/2” fitting, located on the bottom
right hand corner underneath the rangetop.
3.
When all connections have been made, be sure all rangetop controls are in
the off position and turn on the main gas supply valve. Check for gas leaks
by using a 75% water, 25% dish washing soap solution. If a gas leak is
present, shut off gas immediately, tighten all connections, and retest for
leaks.
!
4.
Any opening in the wall behind the appliance and in the floor under the
appliance shall be sealed.
