COPYRIGHT 2016, UNIQUE AUTOMATION
- 5 -
08/11/2016 12:57
Quick Start
Touch the BUI if the graphics display is blank. The graphics display will light up
showing the current and desired temperature and depth. Should you wish to run
the same bath again press
To increase/decrease the desired water temperature
2
use
/
and to
increase/decrease the desired water depth use / . Pressing will start filling to
the new values.
The desired values for water temperature and depth can be altered when
bathomatic is empty and is not filling or draining. Should you wish to change the
desired temperature and depth when bathomatic is filling or draining press
which
will pause bathomatic, then change the values and press and hold
again for
bathomatic to resume filling to the new settings.
Presets
bathomatic stores 9 presets with individual temperature, depth and fragrance
selection.
Running a preset
From the preset menu using the / buttons select the presets you wish to run
followed by the confirmation button
. Each preset indicates temperature and
depth in this menu.
2
Maximum allowed temperature is 43°C
bathomatic runs Preset One
Presets
Preset One
Preset Nine
bathomatic runs Preset Nine
