4. For greater use of the printer
40
Set the number of lines for feeding paper after Print Every, ST (sub total print) and GT (grand
total print).
Meaning of setting
Immediately after every printing, the printed data cannot be checked because the paper has not
yet been ejected from the ejection slot. Set 3 - 4 lines for visually checking every piece of
printed data.
Select a method for selecting codes.
Details of setting
Keyboard
................ Code names can be selected with the keys on the front panel.
Option
..................... Code names can be selected through RS-232C interface or BCD input
(option).
Key table
................ Codes can be selected with the keys on the front panel.
Option table
........... Codes can be selected through the RS-232C interface or BCD input
(option).
Name of setting
21: Feed Lines
Setting range
0 - 9 (lines)
Initial value
0
Caution
Paper is fed by the number of lines set under [Feed Lines] after Print
Every, ST, GT, BT, Sample Print and Test Print. Paper is always fed by
one line with the
[FEED] key.
Name of setting
22: Code Selection Method
Selection item
Caution
If Keyboard/Option is selected, code names can be selected. If Key
Table/Option Table is selected, codes can be selected from code tables.
21: Feed Lines
Example of
DATE 2000/07/01 13:30
--- GRAND TOTAL Ach ---
3 100.15kg
2 100.18kg
1 100.21kg
Feed
lines
printing
22: Code Selection Method
Setting
Ach
Bch
0
(
initial value
)
Key Board
Key Board
1
Option
Key Board
2
Key Table
Key Table
3
Option Table
Key Table