4. For greater use of the printer
22
3.
Upon entry of the Automatic Print ON/OFF setting, the following is
printed. The current set value is indicated on the "NOW" line.
4.
Since the following is subsequently printed, change the set value.
Setting Nos. facilitate identification of each setting.
See detailed explanations of each setting or the appendix "Setting mode list"(page 80).
Current set value
End
-->
ESC
Next
-->
Number-ENT
Change-> -->
ENT
Now => ON
08:Automatic Print
--------------------------
>> Next is 08
operating
To make the Automatic Print setting:
To make other settings:
To end the setting mode:
The current value is "Automatic Print ON".
Change the set value to "OFF".
For changing the set value, develop an input waiting state
with the
[ENT] key.
[ENT]
[Setting No.]
→
[ENT]
[ESC]
> Input new number - ENT
End
-->
ESC
Next
-->
Number-ENT
Change-> -->
ENT
Now => ON
08:Automatic Print
--------------------------
To change
operating
This part is printed.
The following lines
are printed with "3".
Since the OFF set value No. is [0],
press
[0]
→
[ENT].
[Setting No.]
→
[ENT]
About setting Nos.