Unipulse F331, Operation Manual

Page: 74 / 88

65
7 OPTION
65
OP
TION
Chapter
7
■
Continuous transmission formats
- Transmission format 1
- Transmission format 2
■
Setting value LOCK/ Calibration value LOCK
This function to avoid change of setting values and calibration values.
0: OFF (Unlocked state)
1: ON (Locked state)
*1
O : Overload (LOAD, OFL)
H : Under a hold/ Under a judgment
Order of priority: H > O
*4
H : HH limit ON
L : LL limit ON
G : HH limit and LL limit OFF
N : HH limit and LL limit ON
F : Comparison OFF
Order of priority: N, F > (H or L) > G
*2 G : OK ON
N : NG ON
F : Comparison OFF
Order of priority: F > (G or N)
*5 N : Near zero OFF
Z : Near zero ON
*3
H : HI limit ON
L : LO limit ON
G : HI limit and LO limit OFF
N : HI limit and LO limit ON
F : Comparison OFF
Order of priority: N, F > (H or L) > G
*6
Decimal place
0 : None
1 : 0.0
2 : 0.00
3 : 0.000
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
G S , *1 *2 *3 *4 , , , , ± *5 ,
20 21
Sign
+ or - 5-digit linked with indicated value
+
decimal point
Delimiter
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
W T *1 *2 *3 *4 ±
Sign
＋
or
－
*5
SOH STX ETX BCC
Sign
＋
or
－
±
*6
22 23
0 0
5-digit linked
with indicated value
5-digit not linked
with indicated value
BCC calculation target
Each ASCII code of SOH, STX, and ETX
SOH: 01
STX: 02
ETX: 03
BCC calculation method
Each code targeted for BCC calculation is
expressed in hexadecimal notation, and the result
of XOR with all data enters BCC.