Unipower Sageon PSMC I, Product Manual

Page: 43 / 64

SAGEON PSMC I PRODUCT MANUAL
PM990-2999-00, Rev 5 4-3
Note: Any LED that is not illuminated indicates a SAGEON PSMC I internal circuitry failure
requiring a service call to repair.
When completed, press “ Next ” or “ Previous ” to access other test modes. Press “ Escape ” to return
to the main menus or the idle display screen.
4.6 LCD TEST MODE
Press “ Select ” when the display reads “ LCD OFF ” to activate all of the front panel alphanumeric
LCD segments at once. All of the LCD segments in the 2 by 16 matrix should be on during the test.
Each segment consists of a square of pixels on the screen. Be sure each segment's pixels are on.
Note: The LCD’s test will automatically end after approx. 10 seconds. Press “ Select ” again, if
desired, to start the test again.
Note: Any LCD segment or pixel that is not illuminated indicates a SAGEON PSMC I internal
circuitry failure requiring a service call to repair.
When completed, press “ Next ” or “ Previous ” to access other test modes. Press “ Escape ” to return
to the main menus or the idle display screen.
4.7 ALERT TEST MODE
Press “ Select ” when the display reads “ ALERT OFF” to activate the internal audible alert buzzer.
The display changes to “ ALERT ON”. The Alert should be heard now although it may not be heard
in noisy environments like Central Offices.
Note: The Alert test will automatically end after approx. 10 seconds. Press “ Select ” again, if
desired, to start the test again. No sound coming from the Alert in a quiet environment
indicates a SAGEON PSMC I internal circuitry failure requiring a service call to repair.
When completed, press “ Next ” or “ Previous ” to access other test modes. Press “ Escape ” to return
to the main menus or the idle display screen.