Front Matter
Sageon II Bulk Product Manual
PM990-5201-00, Issue 6
i
RECEIVING INSTRUCTIONS
and
GENERAL EQUIPMENT INFORMATION
Please Note: For your protection, this product manual should be read and thoroughly
understood before unpacking, installing, using, or servicing the described equipment.
UNIPOWER, LLC presents all equipment to the delivering carrier securely packed and ready for
transport. Upon acceptance of the equipment from us, the delivering carrier assumes
responsibility for its safe delivery to you. Once you receive the equipment, it is your
responsibility to document any damage to the equipment that was sustained during transport to
you and to file your claim with the carrier promptly and accurately.
PACKAGE INSPECTION
Examine the shipping container for any visible damage: punctures, dents, and any other signs of possible internal damage.
Describe any damage or shortage on the receiving documents and have the carrier’s representative sign his/her full name.
If you're receiving freight bill notes that a Tip-N-Tell is attached to your freight, locate the indicator and note the color of the
arrow. If the Tip-N-Tell arrow has turned even partially blue, this means the freight has been tipped in transport. Make sure
the carrier notes this on your receipt before you sign for the freight.
EQUIPMENT INSPECTION
Promptly upon receipt of shipment, open the container and inspect the contents for damage. If it is necessary to move or
otherwise handle the shipment, refer to the next section, Handling, for instructions and warnings.
Unpack the shipment carefully to avoid scratching or otherwise marring the exterior finish. Be careful not to discard any
included equipment, parts, or manuals. If damage is detected, call the delivering carrier to determine appropriate action. The
carrier may require an inspection.
IMPORTANT:
If damage is detected, save all shipping material for the carrier’s representative!
If damage is detected, also notify UNIPOWER; contact information is in Section 1.6 Product Support. UNIPOWER will
determine if the equipment should be returned for repair. If it is determined that the equipment should be returned to
UNIPOWER, ask the delivering carrier to send the packages back to UNIPOWER at the delivering carrier’s expense. Be sure
that the equipment is properly packaged for shipment.
If repair is necessary, UNIPOWER will invoice you for the repair so that you may submit the bill to the delivering carrier
with your claim form.
It is your responsibility to file a claim with the delivering carrier. Failure to properly file a claim for shipping damages may
void warranty service for any physical damages later reported for repair.
HANDLING
The Sageon II Bulk is moderate in weight. Use sufficient personnel and power equipment to ensure safe handling.
Use extreme care in handling and unpacking the Sageon II Bulk. Refer to section 3.1 for mounting the Power Module.
