Page 25
P O W E R I N G T E C H N O L O G Y
Manual No. PM110-6500-00 rev-2a
PM110-6500-00-rev2a-0117.indd
Load
Breaker Size
[A]
15A
Wire Size
[mm
2
/AWG] 2.5/14
Table 4-2 Cable Sizes - Load
4.5.5 Battery Connections
WARNING
Improper handling with batteries can be dangerous. Please read and understand
the information in the Safety chapter before connecting batteries.
WARNING
The battery breaker should be in the OFF position.
The battery cables should be connected to the battery first, then to the system.
Battery cable (ZLH.00254.01) is custom design for the Aspiro enclosure. (connections are
available at the rear of the system adjacent to the load connections), see Figure 4-8.
To connect:
1. Connect the other end of the battery
cables to the batteries.
2. Connect the SB-50 connector to the rear
of the enclosure labeled BATTERY.
Figure 4-8 Battery Cable Detail
Battery
Breaker Size
[A]
40A
Wire Size
[mm
2
/AWG]
10/8
Table 4-3 Cable Sizes - Battery
4.5.6 Symmetry Connection
1. Attach the inter-block connection plates between the batteries.
2. Insert a suitably sized cable lug into one pole of the inter-block connection plate. Fasten
the lugs and plates to individual battery poles.
