Union Pury 250e, User Manual

Page: 3 / 28

Manual Pury 250e Safety Instructions
Manual Pury 250e 2006-06-08
3
Welcome
Thank you for specifying a Pury 250e for your online process measurement
application.
Please read this manual and follow all directions before installation and use of this
gas purification system.
Unpacking and initial inspection of this unit requires only normal precautions and
procedures applicable to the handling of analytical equipment. All shipping containers
should be carefully checked for any included accessories. Check the shipment
against the packing slip and any system arrangement drawings to ascertain that the
shipment is complete.
The unit was carefully inspected and calibrated at the factory. Check the shipment for
possible damage incurred during transit. If there is any sign of visible damage to the
crate or hidden damage inside the shipment, notify the carrier and the factory
immediately as the equipment warranty does not cover damage in shipping.
In the event of trouble during start-up, please contact a factory representative and
inform them of the model and serial number of the unit, plus a full description of the
problem. Note: The factory will not be responsible if the customer should attempt
repair of the unit during the warranty period without first following any detailed factory
instruction.
All possible care has been taken in the publication of this user’s manual but Union, its
agents and distributors, accept no liability for any inaccuracies or omissions that may
be found. This manual reflects the state of the product at the issue date below but
further refinements may mean that the manual does not fully reflect your particular
system.
Before start up and use of the Pury 250e please take time to carefully review
this manual and its contents. Observe all safety notes, warnings, cautions and
notes – see Chapter 1 for more details.
Union Apparatebau GmbH reserves the right to make changes to this publication and
the product that it describes without notice.