Union Community UBio-X Pro2 User Manual Download Page 6

Page: 6 / 89

UBio-X Pro2 User Guide

UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code: 05836)

Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,

E-Mail :[email protected]; http://www.unioncomm.co.kr

1. Before use

1.1. Safety Precautions



Warning

Handling with wet hands or

allowing liquid to flow into
it is prohibited.

-> It may cause an

electric shock or damage.

Do not place a fire source

near the terminal.

-> It may cause a fire.

Do not disassemble, repair,
or modify the terminal at
discretion.

-> It may cause an electric
shock, fire or damage.

Keep out of reach of

children.
-> It may cause an

accident or damage.

If the above warning is ignored, it may result in death or serious injury.



Cautions

Keep away from direct
sunlight

may

cause

deformation

color

change.

Avoid  high  humidity  or
dust
->  The  terminal  may  be

damaged.

Avoid using water, benzene,

thinner, or alcohol for
cleaning

-> It may cause an electric
shock or fire.

Do not place a magnet
close to the terminal.
-> The terminal may

break

down

malfunction.

Do not contaminate the
fingerprint input area.

-> Fingerprints may not be

well recognized.

Avoid using insecticide or

flammable spray near the
terminal.

-> It may result in
deformation

color

change.

Avoid impacts or using

sharp objects on the
terminal.

-> The terminal may be

damaged and broken.

Avoid severe temperature
changes

-> The terminal may be

broken.

- If the above cautions are ignored, it may result in property loss or human injury.

※ Under no circumstances will UNIONCOMMUNITY Co. Ltd be responsible for accidents or

damages caused by inappropriate use of the product without referring to the user guide.

Summary of Contents for UBio-X Pro2

























































































Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands

Union Community UBio-X Pro2, User Manual

Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands