Union Community UBio-X Pro2 User Manual Download Page 31

Page: 31 / 89

UBio-X Pro2 User Guide

UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code: 05836)

Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,

E-Mail :[email protected]; http://www.unioncomm.co.kr

You can register the name with

[Name]

, employee ID with

[Employee ID]

, fingerprint

with

[Fingerprint]

, face with

[Face]

, duress finger with

[Duress FP]

, card with

[Card]

, and password with

[Password]

button. The registration is basically set to be

user, and it is can be changed to administrator if you click [

Admin

] button. Click

[Save]

button to save the registration, and click

[Cancel]

[BACK]

button to cancel

the registration and return.

※ Only user who is registered as administrator can change the operating method of the

terminal and can register/modify/delete the information of all the saved users, so be

careful to register the administrator.

3.3.1.1. Photo registration

] button at the

[Add User]

screen.

Click the

[Save]

button to register with the present

camera image.

Click

[Cancel]

[BACK]

button to cancel the

registration and return.

Summary of Contents for UBio-X Pro2

























































































Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands

Union Community UBio-X Pro2, User Manual

Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands