Union Community MiKey AC1100 User Manual Download Page 83

Page: 83 / 87

MiKey AC1100 User guide
83

Union Community / Hyundai Topics building 5

floor, 44-3, Bangi 2-dong,

Songpa-gu, Seoul, Korea (138-050)
Tel: 02-6488-3000, Fax: 02-6488-3099, E-Mail:

[email protected]

If you select ‘download customized file’ from the UNIS server program you will be able to

select ‘All File’. UNIS 4.0 and above only.

You can upgrade the new .qm file using the following two ways:

USB – see section

3.10. SD USB

for updating using USB (USB port is service port.)

UNIS – from UNIS, select ‘download customized file’, the select ‘All File(.*)’, browse to

the language file and select it. Select OK, and then select the terminal to send to.

Language files must be in the naming format ‘lang_xx_YY.qm’.

Note: Some languages not on the list above require special fonts to be

imported. You must contact your sales representative if you wish use use a

language not supported on the list.

Note: When you upgrade firmware ‘resources_xxxxx.umgz’ all

language .qm files will be overwritten with the factory .qm files.

Summary of Contents for MiKey AC1100























































































Search results

Summary of Contents for MiKey AC1100

Reviews:

Brands by name

Popular brands

Union Community MiKey AC1100, User Manual

Search results

Summary of Contents for MiKey AC1100

Reviews:

Brands by name

Popular brands