Union Community MiKey AC1100 User Manual Download Page 12

Page: 12 / 87

MiKey AC1100 User guide
12

Union Community / Hyundai Topics building 5

floor, 44-3, Bangi 2-dong,

Songpa-gu, Seoul, Korea (138-050)
Tel: 02-6488-3000, Fax: 02-6488-3099, E-Mail:

[email protected]

Touch the

‘

status touch area

’

along the top of the display

to see detail status information. See 1.3 Main window

display. This will appear for 10 seconds.

Top pop up is a

‘

custom user message

’

.In UNIS user

management you can make a custom message for every

user during the users authentication period.

If camera setting for Display Current Picture or Display User

picture is set and registered card is used. Picture will be

displayed on the top. See Section 3.8.2

If card, mobile key, password is successful, the general

Success message will be displayed.

Bottom Message is black can be 1 of 3 different options.
This depends on the setting in Display

‘

User Display

Options

’

User Name

User ID

User Key

Summary of Contents for MiKey AC1100























































































Search results

Summary of Contents for MiKey AC1100

Reviews:

Brands by name

Popular brands

Union Community MiKey AC1100, User Manual

Search results

Summary of Contents for MiKey AC1100

Reviews:

Brands by name

Popular brands