Union Community MiKey AC1100 User Manual Download Page 63

Page: 63 / 87

MiKey AC1100 User guide
63

Union Community / Hyundai Topics building 5

floor, 44-3, Bangi 2-dong,

Songpa-gu, Seoul, Korea (138-050)
Tel: 02-6488-3000, Fax: 02-6488-3099, E-Mail:

[email protected]

3.7.6. Terminal External

If you select the [Terminal]->[External device] in the main menu, the following window

appears.

▶

Default Setting: Same as the window on the left.

See Installation Guide Section 11 for connecting a

serial printer.

▶

Printer Option

Disabled

–

select this if not using

T/A Ticket – if using Time and Attendance mode and
require a printout every time authorization occurs.

Meal Ticket – if using Meal Mode and require a printout
every time authorization occurs.

The printing format differs as per each setting. The final
result (time/date, mode type, etc) will be printed.
The printer used must be only SRP-350 serial type model.

See Installation Guide Section 12 for connecting an

RS485 bus.

▶

RS485 Option

Disable – select this if not using

LC010/BLC – Select this when using Virdi LC010 or BLC015
external lock controller.

Controller – Select this when using OSDP protocol to an
external controller.

Summary of Contents for MiKey AC1100























































































Search results

Summary of Contents for MiKey AC1100

Reviews:

Brands by name

Popular brands

Union Community MiKey AC1100, User Manual

Search results

Summary of Contents for MiKey AC1100

Reviews:

Brands by name

Popular brands