Uninet iColor 350 User Manual Download Page 35 | Manualshive

Page: 35 / 38

Uninet iColor 350 User Manual Download Page 35

35

UniNet iColor Printing Solutions

|

[email protected]

| www.icolorprint.com

4.

Underneath the printer, wipe the rubber part of the roller with a soft damp cloth. After that, wipe it
with a dry cloth to remove the moisture.

5.

Push the metal plate down until it clicks.

6.

Reload the removed paper into the tray, and then push the tray carefully into the machine until it clicks
into place.

Removing Paper Jams

Caution
• The inside of this machine becomes very hot. Do not touch the parts labeled

(indicating a hot

surface).
• Some of this machine's internal components get very hot. For this reason, take care when removing misfed
paper. Not doing so could result in burns.
• Some of the internal components of this machine might be fragile. When you remove jammed paper, do not
touch the sensors, connectors, LEDs, or other fragile parts that are shown in this manual. Doing so may cause
malfunctions.

For the location of the sensors in the machine and extended options, see the following illustrations:

«
...
33
34
35
36
37
...
»

Summary of Contents for iColor 350







































Reviews:

No comments