32
UniNet iColor Printing Solutions
|
| www.icolorprint.com
9.
Holding the center of the new waste toner bottle, carefully insert it halfway into the machine body.
Leave the bottle cap open.
10.
To prevent the waste toner bottle from coming into contact with the intermediate transfer unit (the
position shown by the arrow in the illustration below), do not lift the bottle while inserting it.
11.
Push in the waste toner bottle until it clicks. Pressing the handle at the center, push the bottle all the
way in.
12.
Place the transfer unit on the front cover. Slide the transfer unit along the guide rails into the machine.
13.
When it stops, push on the PUSH mark until it clicks. 11.
Using both hands, carefully push up the front
cover until it closes.
14.
When closing the front cover, push the upper area of the cover firmly.
Non User Replaceable Components:
If the Alert indicator on the control panel lights up and the "Replace Intermdt Transfer Belt", "Replace Fusing
Unit" or "Replace Transfer Roller" message appears on the display, contact your sales or service
representative.