manualshive.com logo in svg

Uninet iColor 350, User Manual, Page: 19 / 38

Share
Download
Uninet iColor 350 User Manual Download Page 19

 

19 

UniNet iColor Printing Solutions

 | 

[email protected]

 | www.icolorprint.com 

 

 

Easy Setup Using the WPS Button 

 

Make sure the Ethernet cable is not connected to the machine. 
 
1. Check that the router (access point) is working 
correctly. 
2. Press the [Menu] key.  
3. Using the up/down keys, select [Host 
Interface], and then press the [OK] key. 
4. Using the up/down keys, select [Network 
Setting], and then press the [OK] key. 
5. Using the up/down keys, select [Wi-Fi Config.], and then press the [OK] key. 
6. Using the up/down keys, select [Wi-Fi], and then press the [OK] key. 
7. Using the up/down keys, select [Active], and then press the [OK] key.  
8. Press the [Menu] key to return to the Initial screen. 
9. Turn off the printer, and then turn it back on. 
10. Press the [Menu] key. 
11. Using the up/down keys, select [Host Interface], and then press the [OK] key. 
12. Using the up/down keys, select [Network Setting], and then press the [OK] key. 
13. Using the up/down keys, select [Wi-Fi Config.], and then press the [OK] key. 
14. Using the up/down keys, select [WPS], and then press the [OK] key. 
15. Using the up/down keys, select [PBC], and then press the [OK] key. "Connecting..." appears, and the 
machine starts to connect in PBC method. 
16. Press the WPS button on the router (access point) within two minutes.

 

 

 

 
 

 

 

 

 

17. Check the result. If connection has succeeded, press the [Menu] key to return to the initial screen. If 
connection has failed, Press the [Back] key to return to the screen displayed in Step 15. Check the 
configuration for the router (access point), then try the connection again. 

18. Configuring the Wi-Fi settings is complete. 

19. Once complete, follow the steps for ‘Network Setup’ beginning on page 12, but choose ‘Wireless 
Connection’ as the connection type.   

Summary of Contents for iColor 350







































Reviews:

No comments