Body and Implement Mounting Guidelines U500 North America
Implement / Body Installation
August 2005
Page 157 of
294
Figure 4.130: Front mounted crane
Figure 4.131: Center mounted crane
Figure 4.132: Rear mounted crane
Dimensioning of mounting frames for cranes
It is recommended the following materials or materials with a higher
yield stress be used for manufacturing the mounting frames
Tensile strength
Yield stress
Material
10
6
Pa
[N/mm
2
]
10
6
Pa
[N/mm
2
]
E 460 TM
> 560
> 560
460
460
E 500 TM
> 610
> 610
500
500
Table 4.15: Material data
Equivalent materials:
SAE: 480 XLK or
ASTM: A607 Grade 65
Possible outrigger principles
The following outrigger principles are possible on the Unimog. The
outriggers must always mount directly on the mounting frame or the
crane. Outrigger fastening on the Unimog frame is not permitted.
