18
RAZOR COMPACT 250
OPERATING MANUAL
11. MIG: Machine Setup
1.
Begin by first choosing your desired MIG wire based
on what you're welding. Then ensure that you have
paired the selected wire to the correct torch tip, torch
liner, and drive roller.
2.
To change the drive rollers, start by loosening the
tensioner knob by twisting it anti-clockwise. Then pull
it towards you so that the knob clears the upper roller
assembly.
4.
You now have access to the drive rollers. When re-
installing your desired drive rollers, ensure you line up
the key slot on each assembly.
3.
Lift the upper drive roller assembly up and out of the
way. Then, loosen and remove the drive roller retaining
nuts by spinning them anti-clockwise. Do this for both
assemblies.
RAZOR Compact 250 Manual APR23.indd 18
RAZOR Compact 250 Manual APR23.indd 18
6/04/2023 4:03:03 PM
6/04/2023 4:03:03 PM
