15
RAZOR COMPACT 250
OPERATING MANUAL
MIG MODE
TORCH MODE
ADDITIONAL BUTTONS
2T Torch Mode
While in 2T mode, press and hold the torch trigger button to initiate the weld, and continue
holding the trigger down during the duration of the desired weld.
Standard MIG Mode
Select this mode while using a regular MIG torch.
Remote Mode
Press this button to activate Remote Mode. Use this mode to pair with a wired or
wireless remote, or a torch with parameter controls.
Synergic Mode
Press this button to activate Synergic Mode. This will give you single knob quick settings
based on desired amperage, plate thickness, or wire speed. You can also fine-tune the
recommended settings.
Wire Feed
Press this button to activate the drive rollers. This allows for easy and safe wire feeding
when changing out rolls of wire.
Gas Test
Press this button to activate the gas solenoid. This allows you to ensure the gas system
is functioning correctly without wasting wire.
Spool Gun Mode
Select this mode while using a Spool Gun.
Push-Pull Gun Mode
Select this mode while using a Push-Pull Gun.
4T Torch Mode
While in 4T mode, press and release the torch trigger button to initiate the weld. To end
the weld cycle, press and release the torch button again.
2T
STANDARD
MIG
SPOOL
GUN
PUSH
PULL
GUN
4T
SYN
RAZOR Compact 250 Manual APR23.indd 15
RAZOR Compact 250 Manual APR23.indd 15
6/04/2023 4:03:03 PM
6/04/2023 4:03:03 PM
