background image

AIR METAL SAW 

 

 

 

Note: Residual air pressure should not be present after the tool is disconnected from the air supply. However, it 
is a good safety measure to attempt to discharge the tool in a safe fashion after disconnecting to ensure that the 
tool is disconnected and not powered. 

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn off the tool, detach the air supply, 
safely discharge any residual air pressure in the tool, and release the throttle and/or turn the switch to its off 
position before performing any inspection, maintenance, or cleaning procedures.

 

TO PREVENT SERIOUS INJURY: Do not adjust or tamper with any control or component in a way not 
specifically explained within this manual. 

I

mproper adjustment can result in tool failure or other serious 

hazards. 

Installing Blade 

1.  The Blade Guard may be removed when replacing blades, but it must always be on during operation. Using the 

Saw without the Blade Guard can result in severe injury

.  

 

 

 

2.  To remove the Blade Guard, use the Wrench to loosen the two Set Screws on the outside of the tool. When 

replacing the Blade Guard, place it in the slots and tighten the Set Screws. See Figure 1, above. 

 

 

3.  To change blades, first open the Chuck Cover by removing the Screw. Swing the Chuck Cover back on its 

hinge. See Figure 2, above. 

Note: 

When Saw is in the upside down position, the blade teeth will face upward. 

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   `

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC   UNIMAC

Summary of Contents for AIRSAWUMCAH16













Reviews: