Unimac AIRSAWUMCAH16 User Manual Download Page 3

Page: 3 / 12

AIR METAL SAW

Safety

To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool.

Work Area

1. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric

shock, fire, and injury to persons.

2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or

dust. The tool is able to create sparks resulting in the ignition of the dust or fumes.

3. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the

loss of control of the tool.

Personal Safety

1. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool

while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating
the tool increases the risk of injury to persons.

2. Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep hair, clothing, and gloves

away from moving parts. Loose clothes, jewellery, or long hair increases the risk of injury to persons as a
result of being caught in moving parts.

3. Avoid unintentional starting. Be sure the switch is off before connecting to the air supply. Do not carry the

tool with your finger on the switch or connect the tool to the air supply with the switch on.

4. Remove adjusting keys and wrenches before turning the tool on. A wrench or a key that is left attached to a

rotating part of the tool increases the risk of personal injury.

5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better

control of the tool in unexpected situations.

6. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable

conditions. Wear heavy-duty work gloves during use.

7. Always wear eye protection. Wear ANSI-approved safety goggles.

8. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to

cause hearing loss.

9. Risk of Electric Shock. This tool is not provided with an insulated gripping su

rface. Contact with a ″live″ wire

will also make exposed metal parts of the tool ″live″ and shock the operator.

10. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is grounded.

11. Explore the workplace to avoid contact with hidden wiring. Thoroughly investigate the workplace for possible

hidden wiring before performing work. Contact with live wiring will shock the operator.

12.

DANGER!

Keep hands and body away from cutting area and blade. Keep your second hand on auxiliary

handle or motor housing. Heavy duty work gloves are needed for this tool. Contact with the blade will result
in a serious injury.

13. Do not reach hands underneath the workpiece.

Air Source

1. Never connect to an air source that is capable of exceeding 200 psi.

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC `

UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC UNIMAC