Unihoist Ltd Graduate 150, Instruction Manual

Page: 6 / 34

Assembly and Commissioning Instructions
5
The packing carton contains:
• Wheeled base
• Mast and boom assembly
• Leg opening handle
• Document Wallet
• Handcontrol (electric version only)
• Battery charger/control box (electric version only)
• Battery pack (electric version only)
• Charging cable (electric version only)
1. Remove all the parts from the carton and place on the floor, taking care to
protect the finish from damage.
SAFETY NOTE: Some of the parts are heavy and will need to be lifted with
care. Heavier assemblies may require two people to lift.
2. Apply the brakes on the rear castors of the base
3. Fit the mast to the base. The mast fits into a rectangular hole in the top of the
base.
SAFETY NOTE: Possible finger trap. Keep fingers away from the end of the
mast when fitting to the base.
4. When the mast is fully engaged with the base, fit & fully tighten the mast
locking knob.
Holes to be
lined up then
the mast
locking knob
fitted
SF25 Iss.5 July 2012