SETUP INSTRUCTIONS
9
3.
SETUP INSTRUCTIONS
Contents of the Delivery
The DPA-400 installation SW package includes the following items:
•
DPA-400 Setup installer (DPA-400 Setup.exe)
•
Firmware updater utility (UUFUpd.exe)
•
Latest DPA-400 firmware (*.uuf)
•
Release notes (DPA-400_release_notes.txt)
•
This manual
DPA-400 delivery also includes custom cables for monitoring DisplayPort versions 1.2 and
above and DisplayPort Alt mode over USB-C interface.
•
DP to DP Y-cable 2 meters (P/N 546098)
•
DP to DP Y-cable 0.5 meters (for high link rates) (P/N 546118)
•
USB-C to USB-C Y-cable 1 meter (P/N 546109) (ordered separately).
Product Setup
The DPA-400 unit features an USB to serial conversion controller. Therefore its Windows
driver will be installed as a virtual serial port named as a
DPA-400
USB Serial Port
. Please,
use the USB Serial Port driver installed by DPA-400 installer.
Note:
System administrator's privileges are required for performing the installation.
Installing the DPA-400
In order to install the DPA-400 software and driver please follow these steps:
Power up your PC
Open the folder containing DPA-400 installation package
Run
DPA-400 Setup.exe
found in the installation package
In the
Choose Components
dialog please indicate if you need the device drivers to be installed
at this time.
In the following dialogs, indicate the folder where the files will be installed and the Start Menu
folder for the program shortcuts.
DPA-400 software and firmware will now be installed to your PC.
Plug in the DPA-400 unit in a vacant USB port of your PC
Run
DP-Aux Channel Monitor
application
