Unigas RX63, Manual Of Installation - Use - Maintenance

Page: 5 / 127

PART I: SPECIFICATIONS
5
BURNERS FEATURES
Note: the figure is indicative only.
1
Control panel with startup switch
2 Gas valves group
3 Electrical panel
4 Flange
5 Blast tube - Combustion head
6 Air pressure switch
7 Actuator
8 Fan motor
9 Silencer
Gas operation: the gas coming from the supply line, passes through the valves group provided with filter and governor. This one for-
ces the pressure in the utilisation limits. The actuators move proportionally the air damper and the gas butterfly valve, in order to
achieve the optimisation of the gas flue values, as to get an efficient combustion.
The adjustable combustion head can improve the burner performance. The combustion head determines the energetic quality and the
geometry of the flame. Fuel and comburent are routed into separated ways as far as the zone of flame generation (combustion cham-
ber). The control panel, placed on the burner front side, shows each operating stage.
PART I: SPECIFICATIONS
6
5
4
3
2
1
7
8
9