![background image](http://html.mh-extra.com/html/unigas/p20/p20_installation-operation-and-maintanance-manual_842323021.webp)
PART I: INSTALLATION
21
SERVOCONTROL CAMS SETTING
Servocontrol cams setting
The setting procedure is the same for Berger and Landis servocontrols. Refer to the table below for the correct correspondence
of cams.
In the servocontrols BERGER STA6B3.41 e STA4.5, the manual air damper control is not provided. The regulations are carried
out by means of the appropriate tool fitted with the servocontrol (with SQN30) or by means of a screwdriver, affecting on the
screw into the cam (all other servocontrols).
Landis SQN30.151 (hi-lo flame burners)
Landis SQN30.251 (progressive and fully modulating burners)
Berger STA6 B 3.41 (hi-lo flame burners)
Berger STA12B3.41 (progressive and fully modulating burners)
Berger STA15B3.41 (progressive and fully modulating burners)
Fig. 38a
Fig. 38b
Landis SQN70.224A20 (hi-lo flame burners)
Landis SQN70.424A20 (progr. and fully modulating burners)
Berger STA4.5BO.37/6
Fig. 38c
Fig. 38d
BERGER
BERGER
LANDIS
LANDIS
High flame position (set to 90°)
ST2
I
I
RED
Low flame and ignition position
ST1
IV
III
ORANGE
Stand-by position (set to 0°)
ST0
II
II
BLUE
Not used
MV
III
V
BLACK
I
II
III
IV
MV
ST2
ST1
ST0
RED
ORANGE
BLACK
MAN - AUTO
BLUE
I
II
III
IV
Summary of Contents for P20
