PART I: INSTALLATION
12
ELECTRICAL CONNECTIONS
!
Remove the front panel of the electrical board on the burner.
!
Carry out the connections in the power supply electrical board as shown in the following diagrams, verify the fan motor direc-
tion (only in three-phase burners) and refit the electrical board front panel.
For a complete key, see on page 28 and page 31.
Diagrams for burners WITH printed circuit
WARNING: The burners with high-low flame operation are fitted with an electrical bridge between terminals 6 and 7;
in the event of connecting the high/low flame thermostat remove this bridge before connecting the thermostat.
IMPORTANT: In connecting electric supply wires to burner teminal block be sure that ground wire should be longer
than phase and neutral ones.
Burners type P20 - P30 - P50 - P65 single stage, double stage and progressive
Fig. 19a
Burners type P45 single stage, double stage and progressive
Fig. 19b
Summary of Contents for P20
