PART III: OPERATION
33
The burner and consequently the LMV2x.. are factory set; the air and fuel curves as set as well.
Info level
To enter the
Info
level, proceed as follows:
1
in any menu position, press keys
+
and
-
at the same time, then the program will start again:
the display will show
OFF
.
2
until the display will show
InFo
, Press the
enter (InFo)
key
3
then il will show the first code (167) flashing, on the right side it will show the data entered. By pressing
+
or
-
it is possible to scroll
(up or down) the parameter list.
4
If a dot-line is shown on the right, there is no enough room for complete visualisation: press
enter
again the data will be completely
shown for 1 to 3 seconds. By pressing
enter
or
+
and
-
at the same time, the system will exit the parameter visualisation and go
back to the flashing number.
The
Info
level shows some basic parameters as:
