PART III: OPERATION
31
The display will show these data:
The display will show these data:
Setting menu
The setting menu is divided into different blocks:
The accesses to the various blocks are allowed by passwords. Passwords are divided into three levels:
Key F + A
While pressing the two keys contemporarly, the
code
message will appear: by entering the proper
password it is possible to access the
Service
mode.
Info and Enter keys
Used for
Info
and
Service
menues
Used as
Enter
key in the setting modes
Used as
Reset
key in the burner operation mode
Used to enter a lower level menu
-Key -
Used to decrease a a value
Used to enter Info and Serivce during the curve adjustments
+Key +
Used to increase a a value
Used to enter Info and Serivce during the curve adjustments
Keys (+ & - )= ESC
By pr and - at the same time, the ESCAPE function is perfomed:
to enter a lower level menu
Bloc.
Descrizione
Description
Password
100
Informazioni generali
General
OEM / Service / Info
200
Controllo bruciatore
Burner control
OEM / Service
400
Curve rapporto
Ratio curves
OEM / Service
500
Controllo rapporto
Ratio control
OEM / Service
600
Servocomandi
Actuators
OEM / Service
700
Storico errori
Error history
OEM / Service / Info
900
Dati di processo
Process data
OEM / Service / Info
Lock+unlock codes
Flame
Open valves
Fan motor energised
Oil pre-heater energised
Ignition transformers energised
Plant heat request
Parametere setting mode
Info mode
Service mode
Closing actuator
Opening actuator
Unit measure
