PART I: SPECIFICATIONS
7
Technical Specifications
BURNER TYPE
HR75A MG..
HR75A LG..
Output
min - max kW
320 - 2050
Fuel
Natural gas -
Light oil
L.P.G. - Light oil
Category
(see next paragraph)
I
3B/P
Gas rate
min.-max. (Stm
3
/h)
34 - 217
11.9 - 77
Gas pressure
(see Note 2)
Power supply
400V 3N~ 50Hz
Total power consumption
kW
4.05
Pump motor
kW
0.55
Fan motor power consumption
kW
3
Light oil rate
min. - max. kg/h
27-173
Oil viscosity
2 - 7.4 cSt @ 40°C
Oil density
kg/m
3
840
Approximate weight
kg
150
Protection
IP40
Operation
Two stages - Progressive - Fully modulating
Gas train 50 Connection
Ø Valves / Connections
50 / Rp 2
Gas train 65
Ø Valves / Connections
65 / DN65
Gas train 80
Ø Valves / Connections
80 / DN80
Gas train 100
Ø Valves / Connections
100 / DN100
Operating temperature
°C
-10 ÷ +50
Storage Temperature
°C
-20 ÷ +60
Working service*
Intermitent
noise level (sound power level )(**)
dBa, max
80
Note1:
All gas flow rates are referred to Stm
3
/h (1013 mbar absolute pressure, 15 °C temperature) and are valid for G20 gas
(net calorific value H
i
= 34.02 MJ/Stm
3
); for L.P.G. (net calorific value H
i
= 93.5 MJ/Stm
3
)
Note2:
Maximum gas pressure = 360mbar (with
Dungs MBDLE)
= 500mbar (with
Siemens VGD)
Minimum gas pressure = see gas curves.
Note3:
Burners are suitable only for indoor operation with a maximum relative humidity of 80%
(*) NOTE ON THE WORKING SERVICE: the control box automatically stops after 24h of continuous working. The control box
immediately starts up, automatically.
Country and usefulness gas categories
GAS
CATEGORY
COUNTRY
I
2H
AT ES GR SE
FI
IE
HU
IS
NO CZ DK GB
IT
PT CY EE LV
SI
MT SK BG LT RO TR CH
I
2E
LU
PL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
I
2E( R ) B
BE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(*) I
2EK
NL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
I
2ELL
DE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
I
2Er
FR
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(*) Only for I
2EK
: the appliance was configured for the appliance category K (I2K) and is suitable for the use of G and G+ distribution gases according to the specifications as
included in the NTA 8837:2012 Annex D with a Wobbe index of 43.46 – 45.3 MJ/m3 (dry, 0 °C, upper value) or 41.23 – 42.98 (dry, 15 °C, upper value). This appliance can
moreover be converted and/or be calibrated for the appliance category E (I2E). This therefore implies that the appliance “is suitable for G+ gas and H gas or is demonstrably
suitable for G+ gas and can demonstrably be made suitable for H gas” within the meaning of the “Dutch Decree of 10 May 2016 regarding amendment of the Dutch Gas
Appliances Decree and the Dutch Commodities (Administrative Fines) Act in connection with the changing composition of gas in the Netherlands as well as technical
amendment of some other decrees.
