Unigas H365X, Manual Of Installation - Use - Maintenance

Page: 11 / 116

PART I: SPECIFICATIONS
11
To get the input in kcal/h, multiply value in kW by 860.
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15° C
NOTE: The performance curve is a diagram that represents the burner performance in the type approval phase or in the laboratory tests, but does not
represent the regulation range of the machine. On this diagram the maximum output point is usually reached by adjsuting the combustion head to its
“MAX” position (see paragraph “Adjusting the combustion head”); the minimum output point is reached setting the combustion head to its “MIN” position.
During the first ignition, the combustion head is set in order to find a compromise between the burner output and the generator specifications, that is why
the minimum output may be different from the Performance curve minimum
Pressure in the Network / gas flow rate curves(natural gas)
PRESSURE IN
COMBUSTION CHAM
BER
(mbar)
H365X L-
kW
PRESSURE IN
COMBUSTION CHAMBER (mb
ar)
H440X L-
kW
H500X L-
kW
GAS PRESSURE
mbar
H365X M-
Stm
3
/h