9
MOUNTINGS AND CONNECTIONS
Packing
Burners are despatched in cardboard packages whose dimensions are (mm):
340mm x 415mm x 415mm
Packing cases of this kind are affected by humidity and are not suitable for stacking. The following are placed in each packing case:
burner with gas train detached;
gasket to be inserted between the burner and the boiler;
oil flexible hoses;
oil filter;
envelope containing this manual
To get rid of the burner’s packing, follow the procedures laid down by current laws on disposal of materials
Fitting the burner to the boiler
To install the burner into the boiler, proceed as follows:
1
make a hole on the closing door of the combustion chamber as described on paragraph “Overall dimensions”)
2
place the burner to the boiler: lift it up and handle it according to the procedure described on paragraph “Handling the burner”;
3
place the 4 stud bolts (5) on boiler’s door, according to the burner drilling template described on paragraph “Overall dimensions”;
4
fasten the 4 stud bolts;
5
place the gasket on the burner flange;
6
install the burner into the boiler, moving the blast tube inwards the flange, until it reaches the measure requested by the boiler/utili-
sation;
fasten the screws;
7
fix the burner to the stud bolts, by means of the fixing nuts of the flange.
after fitting the burner to the boiler, ensure that the gap between the blast tube and the refractory lining is sealed with appropriate insu-
lating material (ceramic fibre cord or refractory cement).
