background image

Phone Parameters - Administration

Nur für den internen Gebrauch

 A31003-S2000-R102-16-7620 02/2016

134

Provisioning Service, Developer’s Guide

  

  

  

c04.fm

System

Call waiting toggle

Enables or disables the Call waiting feature. If enabled, calls from a third party are allowed 
during an active call.

Immediate ring

Enables or disables the preset delay for all line keys. This feature only applies to keyset lines.

WBM Name

Item name

Type

Values

Description

Key label <n>

key-label-
unicode
<index>

Unicode 
text. 
Max.12 
charac-
ters.

Default: 

Call 

waiting

Label for the key. 

function-
key-def
<index>

Integer

53

Feature ID which defines 
the function.

WBM Name

Item name

Type

Values

Description

Key label <n>

key-label-
unicode
<index>

Unicode 
text. 
Max.12 
charac-
ters.

Default: 

Show 

ringing

Label for the key. 

function-
key-def
<index>

Integer

54

Feature ID which defines 
the function.

Summary of Contents for OpenStage














































































































































































































































































Reviews: