Examples and HowTos
A31003-S2030-M100-11-76A9, 01/2015
398
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
beispiele.fm
Dial Plan
5.5.3
How To Set Up And Deploy A Dial Plan
For creating and deploying a dial plan to an OpenStage phone, a working installation of the DLS
(version V2R4 onwards) is required. This HowTo describes the creation of a simple dial plan
for OpenStage phones by example. Unless otherwise stated, the actions described underneath
are made in the DLS.
1. Log on to the DLS with an account that has suitable rights for deploying a dial plan. For
details, please refer to the Deployment Service Administration Manual.
2. Navigate to IP Devices > IP Phone Configuration > Features > "Dialplan" tab.
3. Check
Dialplan
, if not checked already.
4. Enter a suitable
Dialplan ID
.
5. Click on
to create the first dial plan rule.
6. Enter the following data:
Summary: This rule determines that digit strings which begin with 3 and have a length of 4
digits are sent to the server without delay after the last digit has been entered.
Parameter
Value
Description/Remarks
Digit string
3
This rule matches numbers beginning with 3. For in-
stance, theses might be internal numbers.
Action
S
When all criteria are met, the number is sent to the ser-
ver.
Minimum length
4
This rule matches numbers with a length of 4 digits.
Maximum length 4
Timer
0
The specified
Action
will take place without delay when
all other criteria are met.
