70
If you have mistyped:
Select and confirm. All digits entered are deleted. Re-enter the value and save
the result.
Direct destination select key configuration
If you want to set up a direct destination select key on the second level of the
OpenScape Desk Phone CP400 and/or OpenScape Key Module 400, you can
switch to this level beforehand.
If necessary, switch to the second level
Hold down the Function keys of the phone or of the OpenScape Key Module
400, which is to have a function assigned to it, until the Key Programming Menu
is displayed.
Confirm.
Confirm
j
Enter the phone number and confirm.
Save the setting with the Softkey. The key is programmed.
Deleting key programming
If necessary, switch to the first level
Hold down the Function keys of the phone or of the OpenScape Key Module
400, which is to have a function assigned to it, until the Key Programming Menu
is displayed.
€
Select "Assign telephone function"
Confirm.
€
Select "Delete key"
Confirm. The key’s programming is deleted.
Confirm to complete the process.
back
_
Select the saved procedure with a keystroke.
For procedures with on/off functions, switch the function on with a keystro-
ke and off again with another.
You can also operate the procedure key during a call, which will automati-
cally send the saved figures MFV signals
page 97. Display notifications
during procedure saving
Level shift
_
_
Edit direct destination selec-
-
_
Number
-
_
Q
_
Level shift
_
Release key
-
_
Assign telephone function
-
_
Delete key
_
end
_
