Uniform Industrial UIC802, User Manual

Page: 8 / 15

8 of 15
The UIC802 has build in buzzer to provide audio feedback for prompt to remove
card, card read error, request key entry from user, and completion of data saving
6. Selection “5” – Data Memory Access and Information
1=Upload To upload the content of the memory to P.C.
2=Rec# Display the total number of records (each card read)
3=% MEM Used Display the percentage of memory that are used
7. Selection “6” – Printer Output Option
1=DT Captured data send to RS232 port after each card swipe,
Print delay between records for impact printers
2=TH Captured data send to RS232 port after each card swipe,
Print delay between records for thermal printers
3=NO No data send out to RS232 port after each card swipe
8.
Selection “7” – Print Record Option
1=ALL Print all the card data records stored in the flash memory
2=UNPRN Just print out the card data records that were not printed out
Before
UIC802 System Command Menu
The System Command Menu is used to set up the UIC802 configurations – Time and Date
setting, Sleep Timer, Change Unit Password, Erase flash memory, Set unit ID number, update
flash memory parameters and enable/disable the RFID operation.
1=Upload 2=Rec#
3=% MEM Used
Printer Connect
1=DT 2=TH 3=NO
Print Record
1=ALL 2=UNPRN