9
Important Information
Handling Liquid Damage
Moisture and liquid can damage your cordless phone1
If the handset or repeater/charger is exposed to moisture or
liquid, but only the exterior plastic housing is affected, wipe off
the liquid, and use as normal1
If moisture or liquid has entered the plastic housing (i1e1 liquid
can be heard in the phone or liquid has entered the handset
battery compartment or vent openings on the base), follow these
steps:
Handset
Repeater/charger
Remove the battery cover and disconnect
1.
the battery.
Let dry for at least 3 days with the battery
2.
disconnected and the cover off for
ventilation.
After the handset dries, reconnect the battery
3.
pack and replace the cover. Recharge the
battery fully (15-20 hours) before using.
Disconnect the AC adapter to cut off
1.
the power.
Let dry for at least 3 days before
2.
reconnecting.
IMPORTANT: You must unplug the telephone line while recharging
the battery pack to avoid charge interruption1
CAUTION!
DO NOT use a microwave oven to speed up
the drying process. This will cause permanent damage
to the handset, base and the microwave oven.
Specifications
Use only the supplied AC adapter.
Be sure to use the proper adapter for
the base and any chargers.
Do not place the power cord where it
creates a trip hazard or where it could
become chafed and create a fire or
electrical hazard.
Do not place the unit in direct sunlight
or subject it to high temperatures.
AC
adapter
Part number AAD-041S(M)
Input voltage 240V AC, 50Hz
Output voltage 9V DC@ 350mA
Battery
pack
Part number BT-694s
Capacity
500mAh (BT-694s)
