8
Wall Mounting the Repeater/charger
If you want mount the charger on the wall, you need to adjust the
desk stand:
Pull the locking tab up and
11
back (see the black arrow in the
illustration to the right), and slide
the desk stand straight off1
Flip the stand over so the locking
21
tabs that say
WAll
are facing the
charger with the arrows pointing
down1
31 Align the stand with the
notches on the charger1
Slide the stand onto the
41
notches until it clicks into
place1
Insert two #10 screws into the
51
wall, 30 mm apart1 (For best
results, use a level to ensure
the screws are even1)
Remember to use
appropriate anchors for the
wall material.
Keeping the AC adapter cord
61
out of the way, place the
charger over the screw heads
and slide it down into place1
Switching back to the
desk stand
If you want to switch back to
using the charger on a desktop:
Remove the stand1
11
Rotate the stand so that the locking tabs that say
21
DESk
are facing
the charger with the arrows pointing up1
Align the stand with the notches on the charger1
31
Slide the stand onto the notches until it clicks into place1
41
