Setting the AutoTalk Feature
To turn AutoTalk on:
1.
Remove the Handset from the Base Unit.
2. Press flash/function three times.
3. Press 1.
4. Press mem. A confirmation tone sounds and the
display remains on for two seconds.
To turn AutoTalk off:
1. Remove the Handset from the Base Unit.
2. Press flash/function three times.
3. Press 0.
4. Press mem. A confirmation tone sounds and the
display remains on for two seconds.
Setting the Caller ID Name Tagging Feature
Note: Please read page 34 to fully understand the caller ID feature.
Name Taggin
is a special feature of XCAI680 that allows the cordless phone to display the name of the
calling party i such name and number is stored. in the phone’s dial memory (see page 35). If the calling
party’s detail is not programmed in the dial memory, only the number is displayed.
Note: Refer to your telephone service provider for the availability and subscription to the Caller ID
service.
Telstra however is not yet forwarding the name.
26
