Uniden VP300, Owner'S Manual

Page: 126 / 141

99/114
Replace rule2 Providing the setting number information. 7 digits number is preferred,
from (0~9999999) . . Maximum length is 8 bytes.
+ Provides the rules for encode and decode. Maximum length is 31 digits
number, can be numbers or signs (+, x). (+) means “Or”; (x) means any
numbers that is from 0~9.
Drop Prefix Default: No (Encode). When encountering the accordant rule, a new
number will be added in front of the dialing number. When setting YES,
and encountering the accordant rule, a new number will replace the
dialing number.
Replace rule3 Providing the setting number information. 7 digits number is preferred,
from (0~9999999). . Maximum length is 8 bytes.
+ Provides the rules for encode and decode. Maximum length is 31 digits
number, can be numbers or signs (+, x). (+) means “Or”; (x) means any
numbers that is from 0~9. . Maximum length is 40 bytes.
Drop Prefix Default: No (Encode). When encountering the accordant rule, a new
number will be added in front of the dialing number. When setting YES,
and encountering the accordant rule, a new number will replace the
dialing number.
Replace rule4 Providing the setting number information. 7 digits number is preferred,
from (0~9999999) . Maximum length is 8 bytes.
+ Provides the rules for encode and decode. Maximum length is 31 digits
number, can be numbers or signs (+, x). (+) means “Or”; (x) means any
numbers that is from 0~9. . Maximum length is 40 bytes.
Dial Now Provides the rules for encode and decode. Maximum length is 31 digits
number, can be numbers or signs (+, x). (+) means “Or”; (x) means any
numbers that is from 0~9. But the first digit cannot be “0”. Because 0
cannot judge the rule. So if Dial Now begins with “0”, the system cannot
work. . Maximum length is 124 bytes.
Realm 1 prefix Setting the switching number. Default 1*. Press 1*, the phone switches
to first registered account.
Realm 2 prefix Setting the switching number. Default 2*. Press 2*, the phone switches
to second registered account.
Realm 3 prefix Setting the switching number. Default 3*. Press 3*, the phone switches
to third registered account.
PSTN feature code Setting the switching number. Default 0*. Press 0*, the phone switches
to PSTN line.
Auto Dial Time Default: 5 second. After waiting for a while, but didn’t input any
number, Auto Dial will run automatically. Time zone: (3~9 sec). .
Maximum length is 3 bytes.
Use # for send key Default: YES. It ends with # when execute this action. When setting NO,
it didn’t end with # when execute this action, but according with Auto
Dial Time, after waiting for a while, and didn’t input any information,
then execute this action.
Use * for IP dialing Default YES. When input “*”, it will used as “.”. E.g. When input
192*168*1*100#, it execute”192.168.1.100#”. When setting NO, while
dialing, input (*) doesn’t mean (.).
Auto PSTN backup: Default No. When choose”Yes”, it actives Auto PSTN backup.