32
Switching Between VoIP and Regular Calls
While on a regular phone call you may receive a Skype™ call or while on a Skype™ call
you may receive a regular call. The VG-100 will indicate an incoming call with
an audible call waiting tone and you can do the following:
•
Press ‘
#1
’ to answer new call keeping current call on-hold
•
Press ‘
##
’ to answer call and terminate current call
Once having 2 active calls, you may:
•
Press ‘
#1
’ putting current call on-hold switching to other call
•
Press ‘
##
’ terminating current call switching to other call
•
Press ‘
#2
’ to conference the calls together (see next section)
While on a regular phone call, if you receive a Skype call, you can see the Skype
username on your telephone (if it has alphanumeric CLID display).
Conference Call Between VoIP and Regular
Calls
While on a regular phone call you may receive a Skype™ call or while on a Skype™ call
you may receive a regular call. The VG-100™ adaptor will indicate an incoming call with an
audible tone and you can conference in the additional caller by pressing ‘#
2
’.
While in a conference call, you may press ‘
#1
’ to return to 2 active calls (with PSTN active,
VoIP on-hold), and than as described above to switch between calls (‘
#1
’ – put current on
hold, ‘
##
’ terminate current), or conference them again using ‘
#2
’.
Summary of Contents for VG-100
